There is a 30% restocking fee on all returns .
Let me know what you Need if I don't have it listed yet
And there is much I don't have listed yet !!!!

Shipping will be added to all prices if not already shown.Email me for a shipping quote or total at

 spoked handwheel machined to fit pfaff 130 also balanced close to,or better than the original handwheel .

 PRICE $54.99 + $10.00 SHIPPING

lazerman1@hotmail.com

===========================================
............................NEW
 PFAFF 130 HORIZONTAL SPOOL PIN ADAPTER
These have not been offered since late 1950's,Due to Popolar request I have started---------------------------------------manufactoring them,They are very close to the originals. These are few in number 
as I only Make a few at a time.
Machined From STEEL Stock. These are way Nicer than the last ones.
$39.00 + shipping

ABOVE IS THE NEWEST VERSION , PREVOUS VERSION IS ABOVE THAT. I JUST STARTED USING A LARGER STAINLESS SELL BARREL .

COST $39.00 ( THESE ARE ALOT OF WORK )

===========================================
As of now we do not charge handling or packing
material fees.JUST ACTUAL SHIPPING!!  If you order
multiple items I will give you a combined shipping quote.
=========================================
heavy duty 1.5 amp motor (for PFAFF 130)see comparision below.
( $115.00) . Shipping $12.00 east of texas,$14.00 west of texas.
Below - alphasew china made 1.5 amp on left-------my new heavyduty 1.5 amp on right (Runs cool and very powerful) (May come in Blue or Black.Depending on stock.)
Below : motor and handwheel
upgrade $150.00 + $12.00 shipping
I will balance the hand wheel for an extra $30.00 this can take over 2 hours and I can get them pretty close. Most people don't complain but no one balances a handwheel anymore. These are the best I can buy and cost twice what the Chinese ones cost. Almost no wobble as the Chinese ones have and the hole is actually in the center- Almost no runout , unlike the Chinese ones. These are made in Taiwan. Your machine MUST be in a heavy case or mouted ib a table , especially the small pfaff 30 as these are light and the handwheel is very heavy . these are not balanced perfect but should be ok. if you are VERY picky , I can balance them closer for $30.00 as stated above . These are the best you can buy but not perfect , those days are gone .
you must have the original pfaff motor bracket as shown above
I do not have any for sale .
-------------------------------------------------------
6600 RPM 110 volt ccw. (These are powerful motors)These powerful motors have threaded mounting holes on the back for mounting your existing Pfaff 130 bracket . YOU MUST HAVE YOUR EXISTING ORIGINAL PFAFF MOTOR BRACKET. I do not stock These as they are not made anymore.(The newer Brackets will Not Fit.).
===========================================================================================
--------------------------------------------------------------------
$25.00 + $6.00 shipping
------------------------------------------------------------------------------

PFAFF 130 DESIGN WHEEL WITH MANUAL $55.00

PFAFF 230-260 DESIGN WHEEL WITH MANUAL

 

ALL DESIGN WHEELS PRICED THE SAME.

 

PFAFF 260/262-261 360/362-261

368-261 DESIGHN WHEELS

PFAFF 230-332-338

DESIGN WHEEL WITH MANUAL

-------------------------------------------------------------------------
pfaff 30,130 cord and foot control-$65.009.99 shipping
#(715-EFC)
20 % RESTOCKING FEE
----------------------------------------------------------------------
Open toe embroidery,button hole foot low shank
#(P60791 $15.99
--------------------------------------------------------------------
30 130 CORD #(715)-- $27.99
20 % restocking fee
--------------------------------------------------------------------
PFAFF 130 230 138 feeddogs (HEAVY DUTY TEETH)
$35.00 + $7.00 shipping
20% restocking fee
______________________________________________
WELTING/CORDING FOOT low shank #(40986X6)
 1/4" $19.99 + shipping
 1/2" $19.95 + shipping
 1/8" $19.00shipping
 3/8" $19.95 + shipping
-----------------------------------------------------------------
Rollerfoot lowshank #1854 $17.99
Darning foot low shank #(4021-L) $17.00
Felling foot 4mm low shank #(p60960)$15.00
Felling foot 6mm low shank #(p60970) $19.00
nichrome 5 step foot control #(206) $24.99
Hemmer foot 1/4" low shank #(p60001) $19.00
Hemmer foot 3/16"low shank #(p60005) $19.00
Hemmer foot 1/8" low shank #(P55607) $15.00
Adjustible zipper foot-left,middle,right #(551)$15.00
Light and bracket #(618M)$29.99
20 % RESTOCKING FEE
-------------------------------------------------------------------
Front mount swivel light fits
Pfaff 130 , and other faceplates with top screw
#(BLLswvl)$69.99 + Shipping
20 % RESTOCKING FEE
-------------------------------------------------------------------
Electronic foot control 1.5 amp #(EFC)

$50.00 + $10.00 shipping.

-------------------------------------------------------------------
Original Handwheel for Pfaff 30 or 130 #(6136)
$29.99+ $7.00 shipping
-------------------------------------------------------------------

<< New text box >>

Geared handcrank modified to fit
Pfaff 30 or 130 #(jo2000)- $39.99 + shipping
(must have my modified PFAFF Spoked or simular Handwheel).
Both Spoked wheel and Crank for $84.99 + $12.00 SHIPPING

HANDWHEEL ONLY $54.99 + $12.00 SHIPPING

20% Restocking fee on all returned handweeels

I will balance the hand wheel this can take over 2 hours and I can get them pretty close. Most people don't complain but no one balances a handwheel anymore. These are the best I can buy and cost twice what the Chinese ones cost. Almost no wobble as the Chinese ones have and the hole is actually in the center- Almost no runout , unlike the Chinese ones. 

Some customers put these on their machines then run them full throttle ( not sewing ) these have a lot of mass and will vibrate if your machine is not in a cabinet or at least in a case bottom . I recommend to all of my customers NEVER run your 130 setting on a table as the timing belt is too close to the table surface. I had a 130 on a table once on a towel ( no case bottom ) and the timing belt was rubbing the towel , by the time I saw the smoke , it was too late and the belt was burnt . Last customer said when he sewed ( actually sewed ) the vibration was fine as he wasn't going the speed of light . Keep your plastic wheel for light speedy sewing. Use the spoked wheel for slower heavier or hand crank sewing. Also they are Much easier to manipulate with your hand. And of course , (They look cool ) .
-----------------------------------------------------------------
Pfaff 130 bobbin case #(9076) $26.99
FITS MOST MODELS TO 1472
PFAFF- 130,229,230,260/2,280,290,332,360/2,800,875
1197,1211/2,1213/6,1214/7,1222/9
-----------------------------------------------------------------------
PFAFF 130 NEEDLE PLATE ( $15.00 ) PLUS $9.00 SHIPPING
ALSO FITS 230 AND SYSTEM 130 MACHINHES
-----------------------------------------------------------------------
Pfaff 1473 Bobbin case #(1055)$40.00
PFAFF 1473/5,7550, W/BOBBIN SENSOR OPENING
ORI, NEWPFAFF- 905-955,1006/7,1010-1037
1047/51/67/71,1147/51/71,1371,1467/9,1471/2/3/5
2010/20,2030/40,6085,6091,6112/22/32/52
6230/50/707510/30,7550/60/70,
NEW STYLE WITH LOW BOBBIN INDICATOR
----------------------------------------------------------------------
Pfaff 130 STEEL Bobbin #(9033)
will fit 130,229,230260/2,332,360/2,1197-1222 (10 for $21.99) + $4.00 shipping 9033
These are NOT the Cheap Aluminum Bobbins You see elsewhere
---------------------------------------------------------------------
All shipping quotes are for ther lower 48 states.
Hawaii,Alaska,and Canada please call or write
for shipping Quote.
TO ORDER  email me at lazerman1@hotmail.com

Contact Us

ZEUSMACHINES

 

Cartersville, GA. 30120

 

lazerman1@hotmail.com

 

News

We have recently updated our website to better represent who we are as a company and what we can do for you!

Get Social With Us

Recommend this page on:

Print Print | Sitemap
ZEUSMACHNES